The Timbren Axle Less kit part # ASR35HDS05 would be your best option as it has a 4 inch lift built into it and has a 3,500 lb capacity. Then for idler hubs the part # 8-213-5UC1-EZ would be a great option which fit this spindle and also have a 6 on 5-1/2 inch bolt pattern. view full answer...
I must recommend that you replace the hub/drum as well when changing the size of your braking assemblies because the surface area on the old drums may not line up with the new braking assemblies which is why I recommend replacing both at the same time.
The 10" x 1-1/2" braking assemblies part # K23-472-473-00 will use the same four bolt brake mounting flange as the 10" x 1-3/4" braking assemblies you but we no longer have a correct hub for these.
The most common replacement for the 10"... view full answer...
It is possible that the Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs # 20545I-EZ-72-15 you were looking at will fit your 2012 Aliner Classic Camper but the only way to be sure it to measure your current axle, and find the axle rating of your current axle.
Starting with the measurements you will need to know the hub face to hub face and spring center to spring center measurements. For example the # 20545I-EZ-72-15 has a hub face to hub face... view full answer...
Go To Results